Oce CS 5090 User Manual page 138

Connection to the Printer
Before attempting to print, it is very important to verify the connection
between the print server and the printer. If the connection is not correct, you
will not be able to print.
M
To verify this connection
Make sure that both the print server and the printer are powered on and ready.
1
Push the Test button in briefly (more than on-eighth second but less than five
2
seconds).
If the connection is good, a test page will be printed on the printer:
I
If nothing prints out, make sure that the cable is good and that it is securely
I
fastened. If possible, try a different cable. If you have an XConnect II,
XConnect II Lite, or XConnect 100, make sure that you are not exceeding the
1.75 meter (6 foot) cable length restriction. If the cable is OK but you still
can't print the self-test page, you may need to adjust the parallel port settings
as described in the next section.
138 Océ CS 5090 User Manual