Warranty Inkjet Cartridges For Océ 5350-600, Cs 5050/5070/5090; Priming - Oce CS 5090 User Manual

Priming

In all cases of printing problems with your cartridges, perform a Prime test by
selecting
printouts:
Correct print
Clogged nozzles
because they can be reactivated or compensated.
M
To reactivate the nozzles
Set 100% Colour Test in 2 pass mode (see 'Run a colour test' on page 35)
I
Use Prime Tools (only max. 5 short pulses of 1 second each)
I
Clean the jet plate with distilled water and a lint-free cloth
I
Place the cartridge 10 seconds in hot distilled water (max 5 mm)
I
Ultrasonic cleaning in distilled water for 1 - 2 minutes (max 5mm)
I
If not all nozzles can be reactivated, manual compensation is advised (see
'Compensate manually for clogged jets' on page 123).
M
To compensate electrical defective nozzles
Check whether the electrical contacts are contaminated with ink, grease, debris
or the like and clean.
If the electrical defective nozzles can not be compensated in 4, 6, 8, 10 - pass
mode (or 2, 3, 4, 5 -pass mode for the CS5090), the cartridge warranty applies
and the cartridge will be replaced for free.
Pass mode compensation is displayed in the header of the Prime test printout.
172 Océ CS 5090 User Manual
Utility Menu > Prime
Clogged nozzles
Clogged nozzles are not within the Océ cartridge warranty
Basically there can be three possible prime test
.
Electrical Defects