Set Margins - Oce CS 5090 User Manual

Set margins

You can set margins to 'Normal' or 'Expanded'. Any part of the image that
extends outside the margin will be clipped.
The 'Expanded' setting enlarges the print area and decreases the
margins.When using this setting, check that you align the media accurately
using the guide on the right of the platen so that the ink doesn't exceed the edge
of the media.
The following tables give the margin sizes for cut sheet and roll feed media:
Cut sheet media
Normal
Expanded
Handling ink and media
On three sides
15 mm (0.6")
5 mm (0.2")
Fourth (bottom) side
35 mm (1.4")
35 mm (1.4")
73