External Power Supply; Connecting An External Power Supply; For Use In A Vehicle; Connecting To An External Power Supply Using A Power Cable - Yaesu FR5DR Operating Manual

External Power Supply

Connecting an External Power Supply for Use in a Vehicle
The optional DC Cable with Cigarette-Lighter plug (SDD-13) allows power to be supplied
from a motor vehicle type cigarette lighter socket.

Connecting to an External Power Supply Using a Power Cable

The optional DC cable (E-DC-6) allows the transceiver to be connected to an external
DC power supply.

Using a microSD Memory Card

Using a microSD memory card with the transceiver allows the following functions.
⿠Backing up the transceiver data and information
⿠Saving memory information
⿠Voice recording/playback
⿠Saving GPS log data
⿠Saving image data captured with the optional camera-equipped microphone (MH-
85A11U)
⿠Saving messages downloaded with the GM function or WIRES-X function

Usable microSD Memory Cards

This transceiver only supports the following capacity of microSD and microSDHD mem-
ory cards.
・ 2GB ・ 4GB ・ 8GB ・ 16GB ・ 32GB
• microSD memory cards formatted on other devices may not properly save information
when used with this transceiver. Format microSD memory cards again with this transceiver
when reusing memory cards formatted with another device.
• Do not remove the microSD memory card or turn the transceiver OFF, while saving data to
a microSD memory card is in progress.
Mounting and Dismounting microSD Memory Card
1. Press and hold the Power (Lock) switch to turn
the transceiver OFF.
2. Insert the microSD memory card into the card
slot until a clicking sound is heard (as shown in
the figure at the right).
3. Press and hold the Power (Lock) switch to turn
the transceiver ON.
When the memory card is properly detected,
" " lights on the display.
● Removing the microSD memory card
To remove the microSD memory card (inserted in step 2 above), push the memory card
in until a clicking sound is heard, then remove the memory card.
18
Contact surface