Enabling The Dhcp Relay Agent On An Interface - HP V1910 Switch Series User Manual

V1910 switch series
Hide thumbs Also See for V1910 Switch Series:
Table of Contents

Advertisement

Table 107 DHCP server group configuration items
Item
Server Group ID
IP Address
Return to
DHCP relay agent configuration task

Enabling the DHCP relay agent on an interface

Select Network > DHCP from the navigation tree to enter the default DHCP Relay page shown in
240. In the Interface Config field, the DHCP relay agent state of interfaces is displayed. Click the
icon of a specific interface to enter the page shown in
Figure 242 Configure a DHCP relay agent interface
Table 108 DHCP relay agent interface configuration items
Item
Interface Name
DHCP Relay
Address Match Check
Server Group ID
Return to
DHCP relay agent configuration task
Description
Type the ID of a DHCP server group.
You can create up to 20 DHCP server groups.
Type the IP address of a server in the DHCP server group.
The server IP address cannot be on the same subnet as the IP address of the DHCP
relay agent; otherwise, the client cannot obtain an IP address.
list.
Description
This field displays the name of a specific interface.
Enable or disable the DHCP relay agent on the interface.
Enable or disable IP address check.
With this function enabled, the DHCP relay agent checks whether a requesting
client's IP and MAC addresses match a binding (dynamic or static) on the
DHCP relay agent. If not, the client cannot access outside networks via the
DHCP relay agent. This prevents invalid IP address configuration.
Correlate the interface with a DHCP server group.
A DHCP server group can be correlated with multiple interfaces.
list.
276
Figure
242.
Figure

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1910 seriesV1910-24g-poe (170w)V1910-24g-poe (365w)

Table of Contents