Long Purge Nozzles - Oce Arizona 600 User Manual

Océ | Control Panel

Long Purge Nozzles

Warning:
Media must be installed prior to performing this function.
A long purge is the same as a low purge, except a nozzle print never follows the long purge.
Follow these steps to perform a long purge:
1. Navigate to:
MAINTENANCE
spit heads
2. Press the MENU button. You then see:
MAINTENANCE
long purge nozzles
3. Press the ACCEPT button. You then see:
INKS TO LONG PURGE
C M Y K LM LC
Use the +/- buttons to select the color or colors to long purge.
4. Press ACCEPT to begin purging. You then see:
Cleaning Nozzles
please wait
Pump Cleaning Fluid/Capping Fluid
During normal operation, cleaning fluid (for 5500/6600-series inks) or capping fluid (for
440-series inks) is automatically pumped to the sponges in the capping station. Follow these
steps to perform a manual pumping of cleaning fluid (for 5500/6600-series inks) or capping
fluid (for 440-series inks):
1. Navigate to:
MAINTENANCE
long purge nozzles
2. Press the MENU button. You then see:
MAINTENANCE
pump solvent
3. Press the ACCEPT button to pump cleaning fluid (for 5500/6600-series inks) or
capping fluid (for 440-series inks). You then see:
4-18