Table of Contents
Advertisement
Océ | Ink System
Ink Filter Changes
2.3
The ink filter (OIN #3012001622) can easily be changed without mess by using the
following procedure.
Note: The ink filter must be changed after four bottles of ink have been filtered.
The use of personal protection consistent with the safety recommendations noted at the
beginning of this chapter is strongly recommended.
1.
Remove the ink bottle from the printer and sit on the floor near the end of the
printer.
Gently pull the filter away from the bulkhead and out of the printer.
Note: Observe the ink flow direction arrow on the filters for proper orientation.
2.
With the new filter in hand next to old filter, remove the tube from the top of the
old filter and place on the top of the new filter (see Figure 2-5 and Figure 2-6).
2-4
Figure 2-5 Remove the Top Tube from the Old Filter
Advertisement
Table of Contents
