Table of Contents
Advertisement
Park Carriage
The Park Carriage menu enables the operator to move the carriage back to the home
position or over the capping station. Follow these steps to park the carriage:
1.
Navigate to:
MAINTENANCE
access carriage
2.
Press the MENU button. You then see:
MAINTENANCE
park carriage
3.
Press the ACCEPT button. You then see:
PARK CARRIAGE
'ACCEPT' to start
4.
Press ACCEPT. You then see:
Parking Carriage
please wait
The carriage moves to the home position over the capping station.
High Purge Nozzles.
Warning:
Media must be installed prior to performing this function.
The carriage moves slightly to align with the drain holes in the capping station. The purge
pressure is elevated. This process may take as long as 30 seconds. The purge is then
performed. If multiple purges are requested, a pause occurs between purges to allow the ink
to refill. A blot at the maintenance station is performed after the purge to clean the nozzle
plate. If the printer was idle, a nozzle print follows the blot. Follow these steps to perform a
high purge:
1.
Navigate to:
MAINTENANCE
park carriage
2.
Press the MENU button. You then see:
MAINTENANCE
high purge nozzles
12/9/04
Operator
4-15
Advertisement
Table of Contents
