Table of Contents
Advertisement
CONTROL PANEL MESSAGE
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE SPEED ERROR
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE LCA FAILURE
SYSTEM ERROR [press ACCEPT to
restart]
BLOTTER MOTOR or ENCODER
System Error
Uncorrectable Feed Error
12/9/04
EXPLANATION AND ACTION
Perform the following step before you press
ACCEPT:
1. Clean and/or adjust the carriage cable
tension, as described in Chapter 5.
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
This error can occur after lowering the
maintenance station to clean the print head
nozzle plates. Check if the blotter cloth
supply roll is loose and take up any slack by
turning the supply roll. Press ACCEPT to
restart the printer. If the error does not clear,
call your authorized service representative.
Check for loose media and the correct
attachment of the take-up and supply cores
to the mandrel hubs. Ensure the media-
encoder pinch roller and the media drive
roller pinch rollers are in the correct position.
The media may an unapproved media that
does not work within the printer
specification. Use an approved media. If the
error does not clear, call your authorized
service representative.
System Errors
6-7
Advertisement
Table of Contents
