Figure 3-21 Correct Position Of The Left Side Of The Emtu - Oce Arizona 600 User Manual

Océ | Media System
12. Roll the external media take-up unit (EMTU) into position at the side of each IR
door rest and against the front of the printer, ensuring the EMTU is square to the
printer. Lock the front wheels (see Figure 3-21).
13. Load an empty take-up core the same width as the supply media. Adjust the EMTU
hubs left to right as required to align the edges of the core with the edges of the media
coming out of the printer, and secure the hubs by tightening the knobs.
3-22

Figure 3-21 Correct Position of the Left Side of the EMTU