Test Prints; Main Menu - Oce Arizona 600 User Manual

Océ | Control Panel
Follow these steps to print the Nozzle Print (see Figure 4-9):
1. Navigate to:

MAIN MENU

operator
2. Press the ACCEPT. You then see:
OPERATOR
print parameters
3. Press MENU. You then see:
OPERATOR

test prints

4. Press ACCEPT. You then see:
TEST PRINTS
nozzle print
5. Press ACCEPT. You then see:
NOZZLE PRINT
(1 - 100) pass
Use the +/- buttons to select the number of passes from 1 to 100.
6. Press ACCEPT. The Nozzle Print begins printing.
4-10