Opening The Door; Closing The Door; Media Support System; Figure 3-1 Left Clip Closed - Oce Arizona 600 User Manual

Océ | Media System

Opening the Door

3.2.1
The first step in loading media is to open the IR-heater door on the front of the printer.
Begin by releasing the black clips on both sides of the door (see Figure 3-1) and
(see Figure 3-2).
Grasp the door using the two handles and pull the door towards you and down.

Closing the Door

3.2.2
To close the door, grasp the door using the two front handles and pull the door up and away
from you. Secure the black clips on each side of the door.

Media Support System

3.2.3
Océ Display Graphics Systems strongly recommends that two people change supply and
take-up media rolls. The customer's media support system should be able to support the
weight of a full media roll. Position the media support system as close as possible to the
3-2

Figure 3-1 Left Clip Closed

Figure 3-2 Left Clip Open

Handle
Handle