Table of Contents
Advertisement
Cancel Printing
0.1.2
In roll-to-roll mode, a print job can be cancelled using the following steps:
1.
Press the Cancel button. You then see:
press '-' to cancel
2.
Press the - button. You then see:
CANCELLING PRINT
In Print & Go mode, a print job can be cancelled using the following steps:
1.
Press the Cancel button. You then see:
press '-' to cancel
2.
Press the - button. You then see:
cancel: image name
3.
Press the Cancel button. You then see:
Dry canceled print first[N/Y]? [-/+]
Pressing the - button cancels the drying process. If another print job is in the queue,
the print process for the queued print job begins.
Pressing the + button continues the drying process. You then see:
drying: image name
Important: If the operator cancels a print before the drying cycle is complete, the media
must not be advanced. Otherwise, ink will be transferred to the lower black
roller.
Caution:
If a cancelled print is followed by a print being processed for a faster print
speed, the initial print must be allowed to dry to prevent smudging and ink
lift-off. For example, if an 8-pass print is cancelled and followed by a 2-
pass or 4-pass print, the ink from the 8-pass print may remain wet, lift onto
the take-up roller, and transfer to the subsequent print. This condition can
be prevented by allowing the 8-pass print to dry.
Status Lights
0.1.3
Status lights provide information about the current configuration and the state of the
printer.
12/9/04
Overview
4-3
Advertisement
Table of Contents
