Table of Contents
Advertisement
Océ | Control Panel
Long Purge Nozzles
Warning:
Media must be installed prior to performing this function.
A long purge is the same as a low purge, except a nozzle print never follows the long purge.
Follow these steps to perform a long purge:
1.
Navigate to:
MAINTENANCE
spit heads
2.
Press the MENU button. You then see:
MAINTENANCE
long purge nozzles
3.
Press the ACCEPT button. You then see:
INKS TO LONG PURGE
B C M Y LC LM
Use the +/- buttons to select the color or colors to long purge.
4.
Press ACCEPT to begin purging. You then see:
Cleaning Nozzles
please wait
Pump Cleaning Solution/Fluid
Cleaning solution/fluid is automatically pumped to the sponges in the capping station. The
waste pump is turned On during the cleaning solution/fluid pump cycle and is left On for
five seconds after the cycle is complete. The cleaning solution/fluid bottle is checked for
being empty before the pump is activated. Follow these steps to perform a manual pumping
of cleaning solution/fluid:
1.
Navigate to:
MAINTENANCE
long purge nozzles
2.
Press the MENU button. You then see:
MAINTENANCE
pump solvent
4-18
Advertisement
Table of Contents
