Oce Arizona 600 User Manual page 71

Print Menu Tree
The Print Menu Tree menu prints the entire menu tree structure. Follow these steps to print
the menu tree:
1. Navigate to:
TEST PRINTS
nozzle print
2. Press the MENU button three times. You then see:
TEST PRINTS
print menu tree
3. Press ACCEPT. The Menu Tree begins printing.
Maintenance
0.4.3
The Maintenance menu (see "Maintenance Menu (Part 1)" on page A-5) contains several
maintenance submenus. These maintenance submenus may need to be performed
periodically in addition to the automated maintenance that occurs without direct operator
intervention. Refer to the "Operator Maintenance Schedule" on page 5-2 for additional
information and routine maintenance required on the Arizona 600 printer.
Several maintenance functions can be selected from the front panel menus when the
machine is idle or while printing.
Warning:
Media must be installed prior to performing these functions.
For purge functions, a list of colors to be purged is presented for selection, for example:
INKS TO LOW PURGE
C M Y K LM LC
With this initial setting, all six colors are designated to be purged.
The underscore indicates the color that is the current active item of the list of colors.
Pressing + moves the underscore to the right. Pressing - replaces the letter with a bar. For
example, when C is underscored, pressing - changes the list to:
M Y K LM LC
If you press ACCEPT at this setting, the color cyan is excluded from the purge.
The following setting purges the colors magenta, yellow, black, and light magenta:
M Y K LM
12/9/04
Operator
4-13