Table of Contents
Advertisement
Océ | Printer Maintenance
controlled document and is also supplied with the cleaning kit shipped with the printer.
Follow the steps and precautionary messages in the document closely to ensure optimum
performance from your machine.
Operator Maintenance Schedule
5.3
The Arizona 600 printer requires daily maintenance. Periodic cleaning should be scheduled
for some components during the week. A few minutes spent cleaning ensures the highest
quality prints. Several areas require maintenance to ensure the highest print quality, and the
printer design gives you easy access to all these areas. Diligent application of the Arizona 600
printer Operator Maintenance Schedule Guidelines ensures optimum performance from
your printer.
Table 5-1 Operator Maintenance Schedule Guidelines
Description
Absorbing Pads
Air Pressure Pump
Filter
Blotting Cloth
Capping Station
Carriage Cable
5-2
Procedure
Capping Station Pads: Clean the pads bi-
weekly.
Replace pads every 60 days or sooner if
excessively worn, dirty, or ink encrusted. (See
"Replacing Capping Station Pads" on page 5-
10.)
Capping Station Bed: Replace this large pad
located under the capping station if the pad
becomes saturated with ink.
Replace the filter when the clear crystal mate-
rial begins to fully discolor. (See "Air Pressure
Pump Line Filter" on page 5-19.)
Replace when empty or as indicated by the
control panel messages. (See "Blotting Cloth
Installation" on page 5-11.)
Follow the Capping Station Maintenance pro-
cedure (See "Capping Station Maintenance"
on page 5-8.).
Adjust the carriage cable tension.
(See"Adjusting the Carriage Cable" on
page 5-16.)
Clean the carriage cable. (See "Cleaning the
Carriage Cable" on page 5-17.
Frequency
Bi-weekly
Every 60 days
As required
As required
As required
Twice a week
Weekly or
monthly
Monthly
Advertisement
Table of Contents
