Set The 'Long Plot Mode - Oce ColorWave 600 User Manual

Set the 'Long plot mode'

Set the 'Long plot mode'
Introduction
The 'Long plot mode' setting allows you to produce prints with a print length up to 175
meters.
When the 'Long plot mode' is disabled you can produce prints with a print length up to
22 meters. The print quality matches the print quality that you defined for your print
job.
When the 'Long plot mode' is enabled you can produce prints with a print length up to
175 meters. To be able to print very long prints, the print quality may be less than the
print quality that you defined for your print job.
Before you begin
This setting is editable for the Key operator or Power user.
Attention:
The 'Long plot mode' setting does not apply for PDF or PostScript files.
How to set the 'Long plot mode'
Click 'Configuration' - 'Printer setup'.
1.
Click 'Edit' in the 'Printer languages' bar or click the value of the 'Long plot mode' setting.
2.
Select the correct value.
3.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
326 Chapter 8 - Print quality and Print productivity