Table of Contents
Advertisement
Configuration Print
The Configuration Print menu provides the operator and Océ Display Graphics Systems
service technicians with machine-settings data if the unit must be diagnosed or recalibrated. A
configuration print of factory settings should be stored in one of the bays.
Follow these steps to print the configuration print:
1.
Navigate to:
TEST PRINTS
nozzle print
2.
Press the MENU button. You then see:
TEST PRINTS
configuration print
3.
Press the ACCEPT button. You then see:
CONFIGURATION PRINT
position: (right, center, or left)
Use the +/- buttons to select the required position.
4.
Press ACCEPT. The Configuration Print begins printing.
12/9/04
Figure 4-10 Configuration Print
Operator
4-11
Advertisement
Table of Contents
