Maintenance Cloth Station
5.6
The maintenance cloth station (see Figure 5-8) is located in the left-side end cap. Two doors
provide access for replacing the blotting cloth (OIN# 3012000247). The cloth provides a
purge area for the print heads to remove excess ink from the nozzles and head surface. The
cloth rises via an air cylinder to extract ink from the underside of the carriage.
Blotting Cloth Installation
5.6.1
Follow these steps to install the blotting cloth:
12/9/04
Figure 5-8 Maintenance Cloth Station
Maintenance Cloth Station
5-11