Table of Contents
Advertisement
Océ | Error Messages and Troubleshooting
CONTROL PANEL MESSAGE
Waste Bottle Almost Full
Press ACCEPT to Continue
Please Replace Waste Bottle
and press ACCEPT button
Media Encoder error
press ACCEPT button
BLOTTING CLOTH IS ALMOST OUT
press ACCEPT to continue
BLOTTING CLOTH IS OUT
press ACCEPT to continue
Status and Low Ink Messages
XX:XX Media: XXX' Used: YY' IR/PZ:
XX:XX Media: XXX' Used: YY' IR/PZ:
DOOR OPEN
XX:XX Media: XXX' Used: YY' IR/PZ:
CANCELLING PRINT
XX:XX Media: XXX' Used: YY' IR/PZ:
PRN: [job name] dd%
XX:XX Media: XXX' Used: YY' IR/PZ:
INP: [job name] dd%
XX:XX Media: XXX' Used: YY' IR/PZ:
TST: [job name] dd%
ADD BLACK INK
then press ACCEPT
6-4
Idle
EXPLANATION AND ACTION
Ink waste container is almost full. Monitor
closely, and empty the ink waste container.
Then, press ACCEPT.
Ink waste container is full. Empty the ink
waste container, and press ACCEPT.
The media is not contacting the media
encoder wheel properly. Perform the follow-
ing steps before you press ACCEPT:
1. Lower the media-encoder pinch roller.
2. Verify the supply and take-up core
notches are engaged into the mandrel hubs.
3. Verify that the media is not too thick or
stiff.
Check the amount of blotting cloth available
and monitor frequently. Replace the blotting
cloth before the next long print job.
Replace the blotting cloth, then press
ACCEPT.
Printer is idle.
Printer is idle, but the door is open. Close
the door to return to idle.
Printer is cancelling print.
Printer has printed dd percent of [job name].
Printer has input (parsed) dd percent of [job
name].
Printer has generated dd percent of [test
print].
Black ink is out. Replace the ink, and press
ACCEPT.
Advertisement
Table of Contents
