Table of Contents
Advertisement
Arizona 600 printer pauses to enable the operator to accurately align the media for
the second print. This feature is applicable for very dark images where the media is
not able to hold and dry the volume of ink required to produce acceptable output.
When enabled, the "[Double Print: ON]" message is included in the print statistics
line.
Note: Cancellation of the print is not allowed in both roll-to-toll and Print & Go
6.
Press ACCEPT. You then see:
OPERATOR
print parameters
Job Statistics List
When the menu is set to ON, the printer prints a set of job statistics in the white space
outside the print area along the width of the print. Depending on the color order in the
printer, the job statistics line is either printed in black or cyan. The statistics line is
approximately 17.75 inches wide and is cut off if the image width is shorter. The line also
appears larger than the Onyx PosterShop job statistics line, if selected by the software. The
following is a sample of the job statistics output:
Name
•
Job:
•
Media Type:
•
Overlap:
•
Write Dir.:
•
Resolution:
•
Colors:
•
Print Zone:
•
IR Sensor:
•
Version:
•
Height:
•
Width:
•
Printed:
•
Received:
•
Print Time:
•
SN:
Additional lines will appear in the statistics output when the following options are activated:
•
Head Gap:
•
Min Maint:
12/9/04
modes during the drying cycle if the double print function is enabled.
Job Name.ONX
Media Name
8-pass (or 4-pass)
bidir
Stochastic
6 colors
89F
155F
3.x
0.30 ft.
64 in.
27-Aug-04 16:58 (Day-Month-Year Time)
27-Aug-04 08:34
05:16
801xxx
WIDE
OFF
Example
Operator
4-7
Advertisement
Table of Contents
