Recovering Nozzles By Ams - Oce Arizona 6160 XTS User Manual

Recovering Nozzles by AMS

Recovering Nozzles by AMS
Introduction
After checking nozzle performance and determining that automatic printhead maintenance is
necessary, perform the following procedure.
Procedure
1. Decide what color channels require automatic printhead maintenance (AMS).
From the Tools and Utilities tab, Select Standard AMS on the required color channels.
2.
3.
Reprint nozzle check and evaluate results. Repeat Nozzle Recovery with the AMS, if necessary.
4.
Repeat steps 1 to 3 if necessary.
NOTE
In most cases a non-working nozzle is temporary and should be resolved through the Standard
AMS procedure. Many times a nozzle will recover on its own during printing. If a nozzle does not
recover through standard AMS practices it may be necessary to recover the nozzle by swabbing.
144 Chapter 10 ‐ Printer Maintenance
Océ Arizona 6100 Series