Table of Contents
Advertisement
9.
Press ACCEPT. You then see:
MEDIA MENU
hor margins: (0.2" - 4.0")
Use the +/- buttons to select the required horizontal margin value for a job.
10.
Press ACCEPT. You then see:
MEDIA MENU
ver margins: (0.2" - 4.0")
Use the +/- buttons to select the required vertical margin value for a job.
11.
Press ACCEPT. You then see:
MEDIA MENU
Halogen Lamps maximum power: (min, low, medium, max)
Use the +/- buttons to select the required power.
The default value is max.
The high heat from the flying IR unit can cause some media to wrinkle at the
beginning of a print. The halogen lamps maximum power setting enables the
operator to lower the temperature of the flying IR unit to possibly alleviate the
wrinkling.
12.
Press ACCEPT. You then see:
MEDIA MENU
[media name]
About Printer
0.4.5
The About Printer menu enables you to view on the printer control panel the current
firmware version and the amount of media printed.
Follow these steps to view the About Printer menu:
1.
Navigate to:
MAIN MENU
operator
2.
Press the ACCEPT button. You then see:
OPERATOR
print parameters
3.
Press the MENU button five times. You then see:
OPERATOR
about printer
12/9/04
Operator
4-25
Advertisement
Table of Contents
