Oce Arizona 600 User Manual page 70

Océ | Control Panel
Color Bars
The Color Bars menu prints a set of color bars. The eleven color bars start with Light
Magenta and end with Black. Use the color bars to diagnose and calibrate printer inks for
optimal performance. Follow these steps to print the color bars:
1. Navigate to:
TEST PRINTS
nozzle print
2. Press the MENU button twice. You then see:
TEST PRINTS
color bars
3. Press ACCEPT. You then see:
COLOR BARS
overlap: (2, 4, or 8-pass)
Use the +/- buttons to select the number of passes.
4. Press ACCEPT. You then see:
COLOR BARS
dir: (bidir L<->R, unidir L<-R, unidir L->R)
Use the +/- buttons to set the write direction.
5. Press ACCEPT. You then see:
COLOR BARS
position: (left, center, or right)
Use the +/- buttons to set the required position.
6. Press Accept. You then see:
COLOR BARS
print width: (8.0" - 70.0")
Use the +/- buttons to set print width (8.0 in. - 70.0 in.).
7. Press ACCEPT. You then see:
COLOR BARS
(1 - 10) pass
Use the +/- buttons to select the number of passes.
8. Press ACCEPT. The Color Bars begins printing.
4-12