Figure 3-14 Rotate The Take-Up Core - Oce Arizona 600 User Manual

9. Turn the take-up core with the taped media one revolution (see Figure 3-14). Engage
the pinch roller handle. Only the left and right pinch rollers should touch both the
media and the drive roll. Raise up all other pinch rollers.
Raised
Pinch
Roller
Take-up
Core

Figure 3-14 Rotate the Take-up Core

10. Close the top cover and the front and rear doors, and press the ACCEPT button on
the control panel. You then see:
MEDIA MENU
print side: first side
If you select the first side, go to step 14.
11. Use the +/- buttons to select the second side. You then see:
MEDIA MENU
print side: second side
You only select this option if you are printing the second side of a double-sided
image.
12. Press ACCEPT. You then see:
SECOND SIDE
Supply Core OD: (3.10" - 4.0")
Use the +/- buttons to enter the correct core diameter. The value is increased or
decreased in .01-inch increments. If you do not know the diameter, use a ruler and
measure the outside diameter of the core, and enter the value in this submenu.
13. Press ACCEPT. You then see:
SECOND SIDE
condition media: OFF
12/9/04
Roll-to-Roll Media Installation
Raised
Pinch
Roller
3-11