Snmp-Server Community Mode; Snmp-Server Community Ro; Snmp-Server Community Rw; Snmp-Server Enable Traps - Planet WGSW-24000 User Manual

▫
Format snmp-server community ipmask <ipmask> <name>
▫
Mode Global Config
8.5.22.1 no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable
community name. The community name may be up to 16 alphanumeric characters.
▫
Format no snmp-server community ipmask <name>
▫
Mode Global Config

8.5.23 snmp-server community mode

This command activates an SNMP community. If a community is enabled, an SNMP manager associated
with this community manages the switch according to its access right. If the community is disabled, no
SNMP requests using this community are accepted. In this case the SNMP manager associated with this
community cannot manage the switch until the Status is changed back to Enable.
▫ The default private and public communities are enabled by default. The four undefined
Default
communities are disabled by default.
▫
Format snmp-server community mode <name>
▫
Mode Global Config
8.5.23.1 no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests using
this community are accepted. In this case the SNMP manager associated with this community cannot
manage the switch until the Status is changed back to Enable.
▫
Format no snmp-server community mode <name>
▫
Mode Global Config

8.5.24 snmp-server community ro

This command restricts access to switch information. The access mode is read-only (also called public).
▫
Format snmp-server community ro <name>
▫
Mode Global Config

8.5.25 snmp-server community rw

This command restricts access to switch information. The access mode is read/write (also called private).
▫
Format snmp-server community rw <name>
▫
Mode Global Config

8.5.26 snmp-server enable traps

This command enables the Authentication Flag.