Set Gvrp Interfacemode All; Show Description; Show Garp; Show Gmrp Configuration - Planet WGSW-24000 User Manual

8.6.32.1 no set gvrp interfacemode
This command disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP is
disabled, Join Time, Leave Time and Leave All Time have no effect.
▫
Format no set gvrp interfacemode
▫
Mode Interface Config

8.6.33 set gvrp interfacemode all

This command enables GVRP (GARP VLAN Registration Protocol) for all ports.
▫
Default Disabled
▫
Format set gvrp interfacemode all
▫
Mode Global Config
8.6.33.1 no set gvrp interfacemode all
This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is disabled,
Join Time, Leave Time and Leave All Time have no effect.
▫
Format no set gvrp interfacemode all
▫
Mode Global Config

8.6.34 show description

This command displays the port description information for one or all interfaces.
▫
Format show description {<slot/port> | all}
▫
Mode Privileged EXEC and User EXEC

8.6.35 show garp

This command displays Generic Attributes Registration Protocol (GARP) information.
▫
Format show garp
▫
Mode Privileged EXEC and User EXEC
▫ GMRP Admin Mode - This displays the administrative mode of GARP Multicast Registration
Protocol (GMRP) for the system.
▫ GVRP Admin Mode - This displays the administrative mode of GARP VLAN Registration Protocol
(GVRP) for the system.

8.6.36 show gmrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or all
interfaces.
▫
Format show gmrp configuration {<slot/port> | all}
▫
Mode Privileged EXEC and User EXEC
▫ Interface - This displays the slot/port of the interface that this row in the table describes.