Table of Contents
Advertisement
Source IP Address value.
Source L4 Port Keyword - Specify a packet's source layer 4 port as a match condition
for the selected ACL rule. This is an optional configuration. The possible values are
DOMAIN, ECHO, FTP, FTPDATA, HTTP, SMTP, SNMP, TELNET, TFTP, and WWW.
Each of these values translates into its equivalent port number, which is used as both
the start and end of the port range.
Source L4 Port Number - Specify a packet's source layer 4 port as a match condition
for the selected ACL rule. This is an optional configuration.
Destination IP Address - Enter an IP address using dotted-decimal notation to be
compared to a packet's destination IP Address as a match criteria for the selected ACL
rule.
Destination IP Mask - Specify the IP Mask in dotted-decimal notation to be used with
the Destination IP Address value.
Destination L4 Port Keyword - Specify the destination layer 4 port match conditions
for the selected ACL rule. The possible values are DOMAIN, ECHO, FTP, FTPDATA,
HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates into
its equivalent port number, which is used as both the start and end of the port range.
This is an optional configuration.
Destination L4 Port Number - Specify a packet's destination layer 4 port number
match condition for the selected ACL rule. This is an optional configuration.
Service Type - Select a Service Type match condition for the ACL rule from the
pulldown menu. The possible values are IP DSCP, IP precedence, and IP TOS, which
are alternative ways of specifying a match criterion for the same Service Type field in
the IP header, however each uses a different user notation. After a selection is made
the appropriate value can be specified.
▫
IP DSCP Configuration
Specify the IP DiffServ Code Point (DSCP) field. The DSCP is defined as the
high-order six bits of the Service Type octet in the IP header. This is an optional configuration.
The IP DSCP is specified by possibly selecting one of the DSCP keywords from a dropdown
box. If the value is to be specified by entering its numeric value, then the 'Other' option in the
dropdown box can be selected and a text box will appear where the numeric value of the
DSCP can be entered.
▫
IP Precedence Configuration
The IP Precedence field in a packet is defined as the high-order three bits of the
Service Type octet in the IP header. This is an optional configuration. Enter an integer from 0
to 7.
IP TOS Configuration
The IP TOS field in a packet is defined as all eight bits of the Service Type octet in the
Advertisement
Table of Contents
