Table of Contents
Advertisement
▫
Join Timer - Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2
seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫
Leave Timer - Specifies the period of time to wait after receiving an unregister request for an
attribute before deleting the attribute. Current attributes are a VLAN or multicast group. This may
be considered a buffer time for another station to assert registration for the same attribute in order
to maintain uninterrupted service. There is an instance of this timer on a per-Port, per-GARP
participant basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory
default is 60 centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond
(0.01 seconds).
▫
LeaveAll Timer - This Leave All Time controls how frequently LeaveAll PDUs are generated. A
LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. There is an instance of this timer on a per-Port, per-GARP
participant basis. The Leave All Period Timer is set to a random value in the range of LeaveAllTime
to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The
factory default is 1000 centiseconds (10 seconds). The finest granularity of specification is 1
centisecond (0.01 seconds).
▫
Port GMRP Mode - Indicates the GMRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect.
The factory default is disabled.
▫
Port GVRP Mode - Indicates the GVRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect.
The factory default is disabled.
8.6.37 show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all
interfaces.
▫
Format
show gvrp configuration {<slot/port> | all}
▫
Mode
Privileged EXEC and User EXEC
▫
Interface - This displays the slot/port of the interface that this row in the table describes.
▫
Join Timer - Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2
seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫
Leave Timer - Specifies the period of time to wait after receiving an unregister request for an
Advertisement
Table of Contents
