Switch Front Panel; Led Indications; Switch Rear Panel - Planet WGSW-24000 User Manual

2.1.2 Switch Front Panel

Figure 2-1 shows the front panel of the switch.

2.1.3 LED Indications

Network:
LED Color
PWR Green
LNK/ACT Green
100 Green
FDX/COL Green
Gigabit:
LED Color
LNK/ACT Green
1000 Green
FDX/COL Green

2.1.4 Switch Rear Panel

Figure 2-2 shows the rear panel of the switch
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks
should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch from being
damaged by unregulated surge or current to the Switch or the power adapter.
WGSW-24000 front panel.
Figure 2-1
Function
Lights to indicate that the Switch is powered on.
Lights to indicate the link through that port is successfully established.
Lights to indicate the port is running in 100Mbps speed.
Blink to indicate the switch is actively sending or receiving data over that port.
Function
Lights to indicate the link through that port is successfully established.
Lights to indicate the port is running in 100Mbps speed.
Blink to indicate the switch is actively sending or receiving data over that port.
Figure 2-2 WGSW-24000 rear panel.
100 ~ 240V AC
50 / 60 Hz