Table of Contents
Advertisement
▫
Format
how policy-map [<policyname>]
▫
Mode
Privileged EXEC
If the Policy Name is specified the following fields are displayed:
▫
Policy Name - The name of this policy.
▫
Type - The policy type, namely whether it is an inbound or outbound policy definition.
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
▫
Class Name - The name of this class.
▫
Mark CoS - Denotes the class of service value that is set in the 802.1p header of outbound packets.
This is not displayed if the mark cos was not specified.
▫
Mark IP DSCP - Denotes the mark/re-mark value used as the DSCP for traffic matching this class.
This is not displayed if mark ip description is not specified using the police-two-rate command, or if
policing is in use for the class under this policy.
▫
Mark IP Precedence - Denotes the mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if precedence is not specified using police-tworate
command, or if either mark DSCP or policing is in use for the class under this policy.
▫
Policing Style - This field denotes the style of policing, if any, used (simple, single rate, or two
rate).
▫
Committed Rate (Kbps) - This field displays the committed rate, used in simple policing,
single-rate policing, and two-rate policing.
▫
Committed Burst Size (KB) - This field displays the committed burst size, used in simple policing,
single-rate policing, and two-rate policing.
▫
Excess Burst Size (KB) - This field displays the excess burst size, used in single-rate policing.
▫
Peak Rate (Kbps) - This field displays the peak rate, used in two-rate policing.
▫
Peak Burst Size (KB) - This field displays the peak burst size, used in two-rate policing.
▫
Conform Action - The current setting for the action taken on a packet considered to conform to the
policing parameters. This is not displayed if policing is not in use for the class under this policy.
▫
Conform DSCP Value - This field shows the DSCP mark value if the conform action is markdscp.
▫
Conform IP Precedence Value - This field shows the IP Precedence mark value if the conform
action is markprec.
▫
Exceed Action - The current setting for the action taken on a packet considered to exceed to the
policing parameters. This is not displayed if policing not in use for the class under this policy.
▫
Exceed DSCP Value - This field shows the DSCP mark value if this action is markdscp.
▫
Exceed IP Precedence Value - This field shows the IP Precedence mark value if this action is
markprec.
▫
Non-Conform Action - The current setting for the action taken on a packet considered to not
conform to the policing parameters. This is not displayed if policing not in use for the class under
this policy.
Advertisement
Table of Contents
