Table of Contents
Advertisement
8.6.49 show storm-control
This command displays switch configuration information.
▫
Format
show storm-control
▫
Mode
Privileged EXEC
▫
Broadcast Storm Recovery Mode - May be enabled or disabled. The factory default is disabled.
▫
802.3x Flow Control Mode - May be enabled or disabled. The factory default is disabled.
8.6.50 show vlan
This command displays detailed information, including interface information, for a specific VLAN.
▫
Format
show vlan <vlanid>, where the ID is a valid VLAN identification number
▫
Mode
Privileged EXEC and User EXEC
▫
VLAN ID - There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID
is 1 to 4094.
▫
VLAN Name - A string associated with this VLAN as a convenience. It can be up to 16
alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a
name of `Default`. This field is optional.
▫
VLAN Type - Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that is configured
and permanently defined), or Dynamic (one that is created by GVRP registration).
▫
slot/port - Indicates by slot id and port number which port is controlled by the fields on this line. It is
possible to set the parameters for all ports by using the selectors on the top line.
▫
Current - Determines the degree of participation of this port in this VLAN. The permissible values
are:
Include - This port is always a member of this VLAN. This is equivalent to registration fixed
in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
▫
Configured - Determines the configured degree of participation of this port in this VLAN. The
permissible values are:
Include - This port is always a member of this VLAN. This is equivalent to registration fixed
in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Advertisement
Table of Contents
