Show Diffserv Service - Planet WGSW-24000 User Manual

▫ Non-Conform DSCP Value - This field displays the DSCP mark value if this action is markdscp.
▫ Non-Conform IP Precedence Value - This field displays the IP Precedence mark value if this
action is markprec.
▫ Bandwidth - This field displays the minimum amount of bandwidth reserved in either percent or
kilobits-per-second.
▫ Expedite Burst Size (KBytes) - This field displays the maximum guaranteed amount of bandwidth
reserved in either percent or kilobits-per-second format.
▫ Shaping Average - This field is displayed if average shaping is in use. Indicates whether average
or peak rate shaping is in use, along with the parameters used to form the traffic shaping criteria,
such as CIR and PIR. This is not displayed if shaping is not configured for the class under this
policy.
▫ Shape Committed Rate (Kbps) - This field is displayed if average or peak rate shaping is in use. It
displays the shaping committed rate in kilobits-per-second.
▫ Shape Peak Rate (Kbps) - This field is displayed if peak rate shaping is in use. It displays the
shaping peak rate in kilobits-per-second.
▫ Random Drop Minimum Threshold - This field displays the RED minimum threshold.This is not
displayed if the queue depth management scheme is not RED.
▫ Random Drop Maximum Threshold - This field displays the RED maximum threshold. This is not
displayed if the queue depth management scheme is not RED.
▫ Random Drop Maximum Drop Probability - This field displays the RED maximum drop
probability. This is not displayed if the queue depth management scheme is not RED.
▫ Random Drop Sampling Rate - This field displays the RED sampling rate. This is not displayed if
the queue depth management scheme is not RED.
▫ Random Drop Decay Exponent - This field displays the RED decay exponent. This is not
displayed if the queue depth management scheme is not RED.
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The
following fields are displayed:
▫ Policy Name - The name of this policy. (Note that the order in which the policies are displayed is
not necessarily the same order in which they were created.)
▫ Policy Type - The policy type, namely whether it is an inbound or outbound policy definition.
▫ Class Members - List of all class names associated with this policy.

9.7.4 show diffserv service

This command displays policy service information for the specified interface and direction. The
<slot/port> parameter specifies a valid slot number and port number for the system. The direction
parameter indicates the interface direction of interest.
▫
Format show diffserv service <slot/port> {in | out}
▫
Mode Privileged EXEC