Vlan Acceptframe; Vlan Ingressfilter - Planet WGSW-24000 User Manual

8.6.64.1 no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved
for the default VLAN). VLAN range is 2-4094.
▫
Format no vlan <2-4094>
▫
Mode VLAN database

8.6.65 vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or
priority frames received on this interface are discarded. For Admit All mode, untagged frames or priority
frames received on this interface are accepted and assigned the value of the interface VLAN ID for this
port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN
Specification.
▫
Default Admit All
▫
Format vlan acceptframe {vlanonly | all}
▫
Mode Interface Config
8.6.65.1 no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit All. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the interface
VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE
802.1Q VLAN Specification.
▫
Format vlan acceptframe {vlanonly | all}
▫
Mode Interface Config

8.6.66 vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs
that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports
that are members of that VLAN.
▫
Default Disabled
▫
Format vlan ingressfilter
▫
Mode Interface Config
8.6.66.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs
that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports
that are members of that VLAN.
▫
Format no vlan ingressfilter
▫
Mode Interface Config