Table of Contents
Advertisement
configured.
IP Address - The IP address of the accounting server to add. This field is only configurable
if the add item is selected.
Port - Specifies the UDP Port to be used by the accounting server. The valid range is 0 -
65535. If the user has READONLY access, the value is displayed but cannot be changed.
Secret - Specifies the shared secret to use with the specfied accounting server. This field is
only displayed if the user has READWRITE access.
Apply - The Secret will only be applied if this box is checked. If the box is not checked,
anything entered in the Secret field will have no affect and will not be retained. This field is
only displayed if the user has READWRITE access.
Secret Configured - Indicates if the secret has been configured for this accounting server.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a save is
performed.
Remove - Remove the selected accounting server from the configuration. This button is
only available to READWRITE users. These changes will not be retained across a power
cycle unless a save is performed.
Refresh - Update the information on the page.
4.4.2.5 RADIUS Accounting Server Statistics
This page shows the statistics of RADIUS Accounting Server.
Accounting Server IP Address - Identifies the accounting server associated with the
statistics.
Figure 4-72 RADIUS Accounting Server Configuration
Advertisement
Table of Contents
