Garp - Planet WGSW-24000 User Manual

4.3.4 GARP

4.3.4.1 GARP Status
This screen shows the GARP Status for the switch and for the individual ports. Note that the timers are
only relevant when the status for a port shows as enabled.
Switch GVRP - Indicates whether the GARP VLAN Registration Protocol administrative
mode for this switch is enabled or disabled. The factory default is disabled.
Switch GMRP - Indicates whether the GARP Multicast Registration Protocol administrative
mode for this switch, enabled or disabled. The factory default is disabled.
Slot.Port - Slot.Port of the interface.
Port GVRP Mode - Indicates whether the GVRP administrative mode for the port is enabled
or disabled. The factory default is disabled.
Port GMRP Mode - Indicates whether the GMRP administrative mode for the port is
enabled or disabled. The factory default is disabled.
Join Time (centiseconds) - Specifies the time between the transmission of GARP PDUs
registering (or re-registering) membership for a VLAN or multicast group in centiseconds.
An instance of this timer exists for each GARP participant for each port. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2
seconds).
Leave Time (centiseconds) - Specifies the time to wait after receiving an unregister
request for a VLAN or multicast group before deleting the associated entry, in centiseconds.
This allows time for another station to assert registration for the same attribute in order to
maintain uninterrupted service. An instance of this timer exists for each GARP participant for
Figure 4-43 MAC Filter Summary