Table of Contents
Advertisement
be selected. Possible options are 'all', 'any', or 'acl'. If 'acl' is (supported and) selected, then
an access list (ACL) number is required which is an integer specifying an existing ACL. Only
when a new class is created, this field is a selector field. After class creation this becomes a
non-configurable field displaying the configured class type.
Class Match Selector - This lists all match criteria from which one can be selected to be
added to a specified class. The match criterion 'Every' denotes that every packet is
considered to match the specified class and no additional input information is needed. The
content of this drop down list varies for a specified class based on the selection of the match
criterion 'Reference Class':
If the specified class does not reference any other class, the 'Reference Class' match
criterion is included in the drop down match criteria list. A class reference can be
established by selecting 'Reference Class' and invoking the 'Add Match Criteria'
button.
If the specified class references another class, the 'Reference Class' match criterion is
not included in the drop down match criteria list. This prevents the user from trying to
add yet another class reference, since a specified class can reference at most one
other class of the same type. Moreover, a 'Remove Class Reference' button appears
on the screen that can be invoked to remove the current class reference.
Configurable Data
Class Name - This is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying a class. Class name 'default' is reserved and must not be used.
Non-Configurable Data
Class Type - Displays type of the configured class as 'all', 'any', or 'acl'. Only when a new
class is created, this field is a selector field. After class creation this becomes a
non-configurable field.
Match Criteria - Displays the configured match criteria for the specified class.
Values - Displays the values of the configured match criteria.
Excluded - Displays the inclusion or exclusion of the configured match criteria. When a
match criterion is configured to be excluded, 'Yes' is displayed. Conversely, when a match
criterion is configured to be included, 'No' is displayed.
Advertisement
Table of Contents
