Table of Contents
Advertisement
4.4.1.8 Port Access Summary
This page is to show the configured access control on each port.
Port - Displays the port in slot.port format.
Users - Displays the users that have access to the port.
4.4.2 RADIUS
4.4.2.1 RADIUS Configuration
This page is to configure the RADIUS server connection session parameters.
Max Number of Retransmits - The value of the maximum number of times a request
packet is retransmitted. The valid range is 1 - 15. Consideration to maximum delay time
should be given when configuring RADIUS maxretransmit and RADIUS timeout. If multiple
RADIUS servers are configured, the max retransmit value on each will be exhausted before
the next server is attempted. A retransmit will not occur until the configured timeout value on
that server has passed without a response from the RADIUS server. Therefore, the
maximum delay in receiving a response from the RADIUS application equals the sum of
(retransmit times timeout) for all configured servers. If the RADIUS request was generated
by a user login attempt, all user interfaces will be blocked until the RADIUS application
returns a response.
Timeout Duration (secs) - The timeout value, in seconds, for request retransmissions. The
valid range is 1 - 30. Consideration to maximum delay time should be given when
configuring RADIUS maxretransmit and RADIUS timeout. If multiple RADIUS servers are
Figure 4-68 Port Access Summary
Advertisement
Table of Contents
