The <vlanid> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
▫
Format
macfilter <macaddr> <vlanid>
▫
Mode
Global Config
8.6.6.1 no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the MAC address
<macaddr> on the VLAN <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
no macfilter <macaddr> <vlanid>
▫
Mode
Global Config
8.6.7 macfilter adddest
This command adds the interface to the destination filter set for the MAC filter with the given <macaddr>
andVLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in
the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
macfilter adddest <macaddr> <vlanid>
▫
Mode
Interface Config
8.6.7.1 no macfilter adddest
This command removes a port from the destination filter set for the MAC filter with the given <macaddr>
and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in
the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
no macfilter adddest <macaddr> <vlanid>
▫
Mode
Interface Config
8.6.8 macfilter adddest all
This command adds all interfaces to the destination filter set for the MAC filter with the given <macaddr>
and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in
the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
macfilter adddest all <macaddr> <vlanid>
▫
Mode
Global Config
8.6.8.1 no macfilter adddest all