6000 (centiseconds).
This command has an effect only when GVRP is enabled.
Note
:
▫
1000 centiseconds (10 seconds)
Default
▫
Format
set garp timer leaveall all <200-6000>
▫
Mode
Global Config
8.6.27.1 no set garp timer leaveall all
This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds (10
seconds).
This command has an effect only when GVRP is enabled.
Note
:
▫
Format
no set garp timer leaveall all
▫
Mode
Global Config
8.6.28 set gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default value
is disable.
▫
Format
set gmrp adminmode
▫
Mode
Privileged EXEC
8.6.28.1 no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
▫
Format
no set gmrp adminmode
▫
Mode
Privileged EXEC
8.6.29 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a selected interface. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG),
GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled
if routing is disabled and portchannel (LAG) membership is removed from an interface that has GARP
enabled.
▫
Disabled
Default
▫
Format
set gmrp interfacemode
▫
Mode
Interface Config
8.6.29.1 no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a selected interface. If an interface