Table of Contents
Advertisement
requested be transmitted to a Multicast address, including those that were discarded or not sent.
▫
Broadcast Packets Transmitted - The total number of packets that higher-level protocols
requested be transmitted to the Broadcast address, including those that were discarded or not
sent.
▫
Transmit Packets Discarded - The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a
higher-layer protocol. A possible reason for discarding a packet could be to free up buffer space.
▫
Most Address Entries Ever Used - The highest number of Forwarding Database Address Table
entries that have been learned by this switch since the most recent reboot.
▫
Address Entries in Use - The number of Learned and static entries in the Forwarding Database
Address Table for this switch.
▫
Maximum VLAN Entries - The maximum number of Virtual LANs (VLANs) allowed on this switch.
▫
Most VLAN Entries Ever Used - The largest number of VLANs that have been active on this
switch since the last reboot.
▫
Static VLAN Entries - The number of presently active VLAN entries on this switch that have been
created statically.
▫
Dynamic VLAN Entries - The number of presently active VLAN entries on this switch that have
been created by GVRP registration.
▫
VLAN Deletes - The number of VLANs on this switch that have been created and then deleted
since the last reboot.
▫
Time Since - Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds,
since the statistics for this switch were last cleared.
8.1.6 show logging
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap
▫
Format
show logging
▫
Mode
Privileged EXEC
▫
Number of Traps since last reset - The number of traps that have occurred since the last reset of
this device.
▫
Number of Traps since log last displayed - The number of traps that have occurred since the
traps were last displayed. Getting the traps by any method (terminal interface display, Web display,
upload file from switch etc.) will result in this counter being cleared to 0.
▫
Log - The sequence number of this trap.
▫
System Up Time - The relative time since the last reboot of the switch at which this trap occurred.
▫
Trap - The relevant information of this trap.
Trap log information is not retained across a switch reset.
Note
:
Advertisement
Table of Contents
