Table of Contents
Advertisement
4.2.4.2 Switch Configuration
This page includes the following fields:
Broadcast Storm Recovery Mode - Enable or disable this option by selecting the
corresponding line on the pull-down entry field. The factory default is disabled.
IEEE 802.3x Flow Control Mode - Enable or disable this option by selecting the
corresponding line on the pull-down entry field. The factory default is disabled.
Lag Static Capability Mode - May be enabled or disabled by selecting the corresponding
line on the pull-down entry field. The factory default is disabled.
Figure 4-6 System Description
Figure 4-7 Switch Configuration
Advertisement
Table of Contents
