Table of Contents
Advertisement
4.2.4 Configuration
Use this page to configure the parameters for system management, including the following fields:
System Description
Switch
Network Connectivity
Remote Session
Serial Port
User Account
Authentication List Configuration
Login Session
Authentication List Summary
User Login
Single IP Management
Single IP Mgmt Swap Control
4.2.4.1 System Description
This page shows the basic system information and is available to define the system name, location and
contact person. Includes the following fields:
System Name - Enter the name you want to use to identify this switch. You may use up to
31 alpha-numeric characters. The factory default is blank.
System Location - Enter the location of this switch. You may use up to 31 alpha-numeric
characters. The factory default is blank.
System Contact - Enter the contact person for this switch. You may use up to 31
alpha-numeric characters. The factory default is blank.
System Description - The product name of this switch.
System Object ID - The base object ID for the switch's enterprise MIB.
System IP Address - The IP Address assigned to the network interface.
System Up time - The time in days, hours and minutes since the last switch reboot.
MIBs Supported - The list of MIBs supported by the management agent running on this
switch.
Advertisement
Table of Contents
