Users Snmpv3 Accessmode; Users Snmpv3 Authentication; Users Snmpv3 Encryption - Planet WGSW-24000 User Manual

▫
Format no users passwd <username>
▫
Mode Global Config

8.7.6 users snmpv3 accessmode

This command specifies the snmpv3 access privileges for the specified login user. The valid accessmode
values are readonly or readwrite. The <username> is the login user name for which the specified access
mode will apply.
▫
Default readwrite for 'admin' user; readonly for all other users
▫
Format users snmpv3 accessmode <username> {readonly | readwrite}
▫
Mode Global Config
8.7.6.1 no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified login user as readwrite for the 'admin'
user; readonly for all other users. The <username> is the login user name for which the specified access
mode will apply.
▫
Format no users snmpv3 accessmode <username>
▫
Mode Global Config

8.7.7 users snmpv3 authentication

This command specifies the authentication protocol to be used for the specified login user. The valid
authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password is
also used as the snmpv3 authentication password and therefore must be at least eight characters in
length. The <username> is the login user name associated with the authentication protocol.
▫
Default no authentication
▫
Format users snmpv3 authentication <username> {none | md5 | sha}
▫
Mode Global Config
8.7.7.1 no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified login user to none. The
<username> is the login user name for which the specified authentication protocol will be used.
▫
Format users snmpv3 authentication <username>
▫
Mode Global Config

8.7.8 users snmpv3 encryption

This command specifies the encryption protocol to be used for the specified login user. The valid
encryption protocols are des or none.
If des is specified, the required key may be specified on the command line. The key may be up to 16
characters long. If the des protocol is specified but a key is not provided, the user will be prompted for the