Vlan Protocol Group Remove; Vlan Pvid; Vlan Tagging - Planet WGSW-24000 User Manual

associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently
associated with the group, this command will fail and the protocol will not be added to the group. The
possible values for protocol are ip, arp, and ipx.
▫
Default none
▫
Format vlan protocol group add protocol <groupid> <protocol>
▫
Mode Global Config
8.6.76.1 no vlan protocol group add protocol
This command removes the <protocol> from this protocol-based VLAN group that is identified by this
<groupid>. The possible values for protocol are ip, arp, and ipx.
▫
Format no vlan protocol group add protocol <groupid> <protocol>
▫
Mode Global Config

8.6.77 vlan protocol group remove

This command removes the protocol-based VLAN group that is identified by this <groupid>.
▫
Format vlan protocol group remove <groupid>
▫
Mode Global Config

8.6.78 vlan pvid

This command changes the VLAN ID per interface.
▫
Default 1
▫
Format vlan pvid <1-4094>
▫
Mode Interface Config
8.6.78.1 no vlan pvid
This command sets the VLAN ID per interface to 1.
▫
Format no vlan pvid <1-4094>
▫
Mode Interface Config

8.6.79 vlan tagging

This command configures the tagging behavior for a specific interface in a VLAN to enabled. If tagging is
enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged
frames. The ID is a valid VLAN identification number.
▫
Format vlan tagging <1-4094>
▫
Mode Interface Config
8.6.79.1 no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If tagging is