Table of Contents
Advertisement
▫
Most MFDB Entries Ever Used - This displays the largest number of entries that have been
present in the Multicast Forwarding Database table. This value is also known as the MFDB
high-water mark.
▫
Current Entries - This displays the current number of entries in the Multicast Forwarding Database
table.
8.6.45 show monitor
This command displays the Port monitoring information for the system.
▫
Format
show monitor
▫
Mode
Privileged EXEC
▫
Port Monitor Mode indicates whether the Port Monitoring feature is enabled or disabled. The
possible values are enable and disable.
▫
Probe Port slot/port is the slot/port that is configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.
▫
Monitored Port slot/port is the slot/port that is configured as the monitored port. If this value has
not been configured, 'Not Configured' will be displayed.
8.6.46 show port
This command displays port information.
▫
Format
show port {<slot/port> | all}
▫
Mode
Privileged EXEC
▫
slot/port - The physical slot and physical port.
▫
Type - If not blank, this field indicates that this port is a special type of port. The possible values
are:
Mon - this port is a monitoring port. Look at the Port Monitoring screens to find out more
information.
Lag - this port is a member of a port-channel (LAG).
Probe - this port is a probe port.
▫
Admin Mode - Selects the Port control administration state. The port must be enabled in order for
it to be allowed into the network. - May be enabled or disabled. The factory default is enabled.
▫
Physical Mode - Selects the desired port speed and duplex mode. If auto-negotiation support is
selected, then the duplex mode and speed will be set from the auto-negotiation process. Note that
the port's maximum capability (full duplex -100M) will be advertised. Otherwise, this object will
determine the port's duplex mode and transmission rate.
▫
The factory default is Auto.
▫
Physical Status - Indicates the port speed and duplex mode.
▫
Link Status - Indicates whether the Link is up or down.
▫
Link Trap - This object determines whether or not to send a trap when link status changes. The
Advertisement
Table of Contents
