Table of Contents
Advertisement
4.2.4.11 Simple IP Management
Use this page to configure the stacking WGSW-24000/WGSW-2620 in a single IP Address.
Single Ip Management - Enable or disable this option by selecting the corresponding line
on the pull-down entry field. The factory default is disabled.
Group ID - Enable or disable this option by selecting the corresponding line on the
pull-down entry field. The factory default is disabled.
Switch ID - May be enabled or disabled by selecting the corresponding line on the
pull-down entry field. The factory default is disabled.
IP Address - The IP address for the single ip management IP interface. The factory default
value is 0.0.0.0.
Subnet Mask - The IP subnet mask for the single ip management IP interface. The factory
default value is 0.0.0.0.
Default Gateway - The default gateway for the single ip management IP interface. The
factory default value is 0.0.0.0.
Client Switch Id - The id of client switches in the same single ip management group. Only
the master switch can see this information
Figure 4-10 User Login Configuration
Advertisement
Table of Contents
