Table of Contents
Advertisement
Start File Transfer - To initiate the upload you need to check this box and then select the
submit button.
4.2.10.7 Ping
Use this screen to tell the switch to send a Ping request to a specified IP address. You can use this to
check whether the switch can communicate with a particular IP station. Once you click the Submit button,
the switch will send three pings and the results will be displayed below the configurable data. If a reply to
the ping is not received, you will see No Reply Received from IP xxx.xxx.xxx.xxx, otherwise you will
see Reply received from IP xxx.xxx.xxx.xxx : (send count = 3, receive count = n).
Configurable Data
IP Address - Enter the IP address of the station you want the switch to ping. The initial
value is blank. The IP Address you enter is not retained across a power cycle.
Figure 4-31 Upload File from Switch
Advertisement
Table of Contents
