Show Spanning-Tree Vlan; Spanning-Tree; Spanning-Tree Configuration Name - Planet WGSW-24000 User Manual

▫ Configuration Name - Configured name.
▫ Configuration Revision Level - Configured value.
▫ Configuration Digest Key - Calculated value.
▫ Configuration Format Selector - Configured value.
▫ MST Instances - List of all multiple spanning tree instances configured on the switch

11.1.8 show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
▫
Format show spanning-tree vlan <vlanid>
▫
Mode Privileged EXEC and User EXEC
▫
VLAN Identifier
▫ Associated Instance - Identifier for the associated multiple spanning tree instance or "CST" if
associated with the common and internal spanning tree

11.1.9 spanning-tree

This command sets the spanning-tree operational mode to enabled.
▫
Default Disabled
▫
Format spanning-tree
▫
Mode Global Config
11.1.9.1 no spanning-tree
This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-tree
configuration is retained and can be changed, but is not activated.
▫
Format no spanning-tree
▫
Mode Global Config

11.1.10 spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The <name> is a string of at most 32 characters.
▫ The base MAC address displayed using hexadecimal notation as specified in IEEE
Default
802 standard.
▫
Format spanning-tree configuration name <name>
▫
Mode Global Config
11.1.10.1 no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.