prompted to confirm that the password reset should proceed.
▫
Format
clear pass
▫
Mode
Privileged EXEC
8.8.5 clear port-channel
This command clears all port-channels (LAGs).
▫
Format
clear port-channel
▫
Mode
Privileged EXEC
8.8.6 clear traplog
This command clears the trap log.
▫
Format
clear traplog
▫
Mode
Privileged EXEC
8.8.7 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
▫
Format
clear vlan
▫
Mode
Privileged EXEC
8.8.8 copy
This command uploads and downloads to/from the switch. Local URLs can be specified using tftp or
xmodem. The following can be specified as the source file for uploading from the switch: startup
configuration (nvram:startup-config), error log (nvram:errorlog), message log (nvram:msglog) and
trap log (nvram:traplog). A URL is specified for the destination.
The command can also be used to download the startup configuration or code image by specifying the
source as a URL and destination as nvram:startup-config or .system:image respectively.
The command can be used to the save the running configuration to nvram by specifying the source as
system:running-config and the destination as nvram:startup-config
The command can also be used to download ssh key files as nvram:sshkey-rsa, nvram:sshkey-rsa2,
and nvram:sshkey-dsa and http secure-server certificates as nvram:sslpem-root,
nvram:sslpemserver, nvram:sslpem-dhweak, and nvram:sslpem-dhstrong.
▫
none
Default
▫
Format
copy nvram:startup-config <url>
copy nvram:errorlog <url>
copy nvram:msglog <url>
copy nvram:traplog <url>
copy <url> nvram:startup-config
copy <url> system:image